Cb0178-12 load data.

Detailed Description. Claybuster CB0118-12 WT Promo wads (500/bag) The Claybuster wad line is an economical wad line built for target-shooters and wing-shooters alike. With twenty-five different models from which to choose, the Claybuster wad line can satisfy nearly every target or wing shooting application for reloading.12 GAUGE LITE Hull: AA-HS or any Remington (Avoid Federals -- too much internal volume.) Shot Weight/Size: 3/4 oz. No. 9 (Actual average dropped, 315 gr.) Powder: 15.8 gr. Alliant Promo MEC Powder Bushing: No. 27 Primer: Fiocchi 616 (209), W209 or STS209 Wad: Claybuster CB0178-12 (Clone of the gray WAA12L and the best wad for …Buy Claybuster Shotshell Wads 12 Gauge CB0178-12 (Replaces WAA12L) 7/8 oz Online. Intended as an economical wad replacement for name brand wads, Claybuster wads are ideal for target and wing shooters. Made with 100% prime resin for consistency with every loaded shell. The CB0178-12 wad was designed for use in 7/8 oz to 1 oz trap, skeet, or sporting clays loads. Quantity. Detailed Description. Claybuster CB1100-12 WAA12SL wads (500/bag) The Claybuster wad line is an economical wad line built for target-shooters and wing-shooters alike. With twenty-five different models from which to choose, the Claybuster wad line can satisfy nearly every target or wing shooting application for reloading. Claybuster Wads CB0178-12. Intended as an economical wad replacement for name brand wads, Claybuster wads are ideal for target and wing shooters. Made with 100% prime resin for consistency with every loaded shell. The CB0178-12 wad was designed for use in 7/8 oz to 1 oz trap, skeet, or sporting clays loads. Replaces the Winchester WAA12L.

In the field of engineering, a point load is a load applied to a single, specific point on a structural member. It is also known as a concentrated load, and an example of it would ...Claybuster CB1075-20 20ga 3/4oz wad (bag/500) CB1075-20 (3/4 oz. Wad) For use in 3/4 oz. skeet, sporting clays or hunting loads. Versatile for most hulls depending on powder volume. www.ballisticproducts.com. templetk333.I have been reloading the older style AA hulls for quite some time. I recently got some of the new(er) style HS hulls to try. I substituted them in my recipe for the older style (19.5gr Green Dot, Winchester 209 Primer, CB1118-12 wad) and at first, experienced a large hole in the center.

141114-6123X9 12 Cheddite Ched209 Win AA Sup. Handicap 26 L078 X-Stream Spreader 7/8 382 Lead #9 10000 1485 141114-61239 12 Cheddite Ched209 Win AA Sup. Handicap 26 L078 OS12 7/8 382 Lead #9 10000 1485 141114-6125-75 12 Cheddite Ched209 Win AA Sup. Handicap 28 L078 7/8 382 Lead #7.5 10700 1600 141114-6125X8 12 Cheddite Ched209 Win AA Sup. For 7/8 ounce loads I'm pretty much dead set on Claybuster CB0178-12 or WAA12L clones (grey ones), as there are several published loads for those. ... 7/8's Ounce Shot Loads Winchester Hull Primer Powder Grains Velocity F.P.S. Pressure P.S.I WIN 209 Clays 17 1200 7000 WIN 209 Clays 18 1250 7500

This spherical powder is a versatile shotshell propellant for heavy field loads, providing true magnum velocities with superb patterns. Great loads in 28-, 20-, 16- and 12-gauge are shown in Hodgdon's Reloading Data Center. In addition, LONGSHOT is the best choice for those competitors shooting games such as 'Buddy', 'Annie Oakley' and more.I don't know why so many people keep trying to complicate 3/4 oz. loads. Just pick any 12-gauge powder and 7/8 oz. recipe and stick a 3/4 oz. charge bar in... in this thread in this sub-forum in the entire site. Advanced Search Cancel ... Shotshell Reloading. 3/4 oz. loads. Jump to Latest Follow 21 - 35 of 35 Posts ...Zero wad pressure. 2. Lower the precrimp as far as possible, just before it buckles the case. 3. Adjust the cam for maximum "swirl" in the crimps. Follow the manual instructions for removing a hole in the crimp. 4. Raise the crimp depth until it just barely flattens the crimp.I did find RamShot Competition, and use their 7/8-oz load data to load 3/4-oz loads. Load: Rem-STS 12 / Win209 / 21.0-gr Comp / CB-0175 / 3/4-oz hard #8-1/2. Competition is a spherical powder, meters very well in my equipment, and the load data will support heavier shot loads by using a different wad. No dished crimps, easy to transition from 3 ...Sheet1 Page 1. CB0175-12 Reloading Data ~ ¾ Ounce Shot Loads. Powder Grains Primer Velocity Pressure. ¾ Extra-Lite 14.5 Win 209 1225 6900 ¾ Extra-Lite 15 Win 209 1260 7300 ¾ Extra-Lite 16 Win 209 1300 7600 ¾ Red Dot 15.2 Win 209 1200 5900 ¾ Red Dot 16 Win 209 1250 6300 ¾ Red Dot 16.5 Win 209 1300 6700 ¾ Clay Dot 15.5 Win 209 1200 5800 ...

Typically a fast shotgun powder is used in 12 gauge loads, often 13-15 grains of a suitable powder, 3/4 ounce or 7/8 ounce of shot. The (ClayBuster) CB 0175 and CB 0178 wads get a lot of use. The (ClayBuster) CB 0175 and CB 0178 wads get a lot of use.

CB 1075-20 Reloading Data ~ 3/4 Ounce Shot Loads. J-Ron Inc.'s Claybuster Wad Line is a well established economical wad line built for target-shooters and wing-shooters alike. With twenty-one different models from which to choose, the Claybuster Wad Line can satisfy nearly every target or wing shooting application for reloading.

The CB0178-12 I use for my 3/4 oz. 12 gauge loads would be the only wad that would come anywhere near working and you'd have to add a LOT of filler to each payload to even approach a decent crimp. With that much hull volume and that ultralight load a powder charge that wouldn't end up as near squibs would be sheer guesswork. MEC Shotshell Wads 12 Gauge 78T4 (Replaces WAA12L, CB0178-12, XXL Pink) 7/8 oz Bag of 500. Product #: 428693. Manufacturer #: MEC78T4. UPC #: 098489035910. Write the First Review Ask a Question. Our Price: Try them both (The Claybuster CB 6100 A), and the DRFO (aka 'Dry-fo') that you can either get from gamaliel's. or directly (by the case) from GCBlueRock, the Downrange distributor who is a member here. For samples, and as I told you in your duplicate thread, I can send you some CB 6100's to try. For the DRFO's, Gregg, GCBlueRock can get you ...My load, and a very common load for cowboy action. AA Or STS hull (STS Preferred) Federal 209A primer. 14.0 grs Clays or Clay Dot. Clear Duster or Claybuster CB0178-12. 7/8 oz. #7-1/2 Shot. Very low pressure and recoil.... Approx. 1020 FPS.15172 posts · Joined 2007. #9 · May 13, 2014. I know that chuckie. I shoot that load as well, but with a DR wad. It's a great load. But, nobody should rely on load data given on a discussion web as gospel. They should go by the loading manual or call the powder manufacturer if an unlisted substitution is considered.

Federal Gold Medal Plastic. Win 209. 700x (16 gr) Claybuster CB0178-12 wad (WAA12L) 7/8 oz lead #7.5. My goal is to get a load that is as comfortable as possible for my daughter shooting for her high school trap team. She's fairly petite and the store bought shells seem to pound on her. Right now she's shooting 1145 fps 1 oz loads.Like many industries, trucking and freight shipping has become increasingly dependent on technology. Trucking load boards are part of this shift to a digital business framework. In...With 700X powder I think you will need a CB0178-12 wad or a WAA12L wad for 7/8 oz loads in Rem Nitro or STS hulls. 700X doesn't take up as much space as some powders like Clays, Red Dot or Clay dot. With the load data you posted I would load at least 17.0 gr of 700X in both the 7/8 oz and 1 oz loads. We need to know what hulls you plan on using ...As we continue to rely more on digital mapping technology, it’s becoming increasingly important to optimize the size of our maps. Large map files can be cumbersome, slow to load, a...Quantity. Detailed Description. Claybuster CB1100-12 WAA12SL wads (500/bag) The Claybuster wad line is an economical wad line built for target-shooters and wing-shooters alike. With twenty-five different models from which to choose, the Claybuster wad line can satisfy nearly every target or wing shooting application for reloading.The load: Remington STS or Winchester AA hulls. 7/8 ounce #8-1/2 shot. 16.1 to 16.3 grs. Titewad. WAA12L or CB0178-12 wad. Remington STS or Winchester 209 primer. I've not bothered to check the velocity or pressure of this load, but Hodgdon lists a 16.9 gr. Titewad load as producing 1250 fps @ 8,200 psi. The CB0178-12 wad was designed for use in 7/8 oz to 1 oz trap, skeet, or sporting clays loads. Technical Information Replaces the Winchester WAA12L Optimal Load: 7/8 oz Intended as an economical w Claybuster wads are ideal for target and wing shooters.

The CB2118-12 replaces the now discontinued Federal 12S3 wad. For use in 1-1/8 to 1-1/4 oz. trap, skeet, sporting clays, or hunting loads. Performs best in straight wall cases such as Federal paper or plastic and Fiocchi. Optimum load is 1-1/8 oz. Product Reviews Click here to review this item. Dished crimps on Federal hulls with 1-1/8oz loads.Win 209 primer. Claybuster CB5050-410HS wads. 296 or H110 powder (they are the same ST marks powder, so pick up which every branding name is cheaper) and this powder will give the hulls the longest reloading life. Ream the shot bushing to throw 226Gr of shot in your reloading. The stock 1/2oz bushing is going to throw about 214grs, true 1/2oz ...

With our load data you can search by caliber, bullet weight, powder, powder manufacturer or a combination of all four. Search over 311,644 loads! Metallic Search ... Richard Mann / Wolfe Publishing Co. 12/1/2009 . Alliant recently released a new rifle powder called Reloder 17. The company claims this cylindrical (stick) powder meters easily and ...CB0175-12 Reloading Data ~ ¾ Ounce Shot Loads. J-Ron Inc.'s Claybuster Wad Line is a well established economical wad line built for target-shooters and wing-shooters alike. With twenty-one different models from which to choose, the Claybuster Wad Line can satisfy nearly every target or wing shooting application for reloading.With twenty-three different models from which to choose, the Claybuster Wad Line can satisfy nearly every target or wing shooting application for reloading. The wads are manufactured, and have always been manufactured, with 100% prime resin so a consistent quality product can be expected with every purchase.The dependency load is the age-population ratio that is usually not a part of the work force. Dependency load is most commonly referred to as the dependency ratio. The total depend...I quickly abandoned that approach, and lived with the grey Claybuster CB0178-12 wad in Gun clubs for ¾ oz for the longest time like everyone else was doing. ... I started loading with 19.5 gr WST 1 oz #8 and CB1100-12 wads. These loads worked fine but I wanted to experiment with lighter loads. I got a 7/8 bar and using the same #29 bushing and ...Optimum load is 3/4 oz. Featuring Lead-in Taper . CB0178-12 (WAA12L) For use in 7/8 to 1 oz. trap, skeet or sporting clay loads. Performs best in tapered hulls, Remington or …Gil, I have been shooting 12 ga. 3/4 oz. for over 3 years now for skeet, sporting clays and some trap. I have been using Remington Gun Clubs, Claybuster CB1075-12 wads, Remington primers STS209 but now have switched over to Federal 209A's and using 1/2 gr. less powder. Loads are very nice and no misfires even in cold weather.12G Claybuster CB0178-12 'WAA12L' Wads (500) quantity. Add to cart. Category: Components Tags: 12, 12G, CB0178-12 ... Clone of the popular Winchester 'WAA12L'; designed for use in 7/8 to 1 oz loads. Designed for tapered hulls. Optimum load is 7/8 oz. Additional information. Weight: 0.5 kg: Dimensions: 35 × 21 × 18 cm: Gauge: 12G. Related ...3/4 oz. 12 ga. Loads with e3. I searched the reloading section and found Case's light 3/4 oz. load. There was a comment in the string from Case that said you could use any 12 ga. powder, and using a published 7/8 oz. recipe for that powder, drop a grain or two. I currently use 16.2 gr. of e3 with a 7/8 oz. load, so I would have to drop down to ...STS or Gun Club hull, STS209 primer, 15.8 grains Alliant ExtraLite, CB0178-12 wad and 7/8oz #8 1/2 shot. Alliant says 1200fps @ 7450fps. It is super clean, fits well, is cheap to reload and works with your standard press settings. Here are two more loads that work well, but require crimp adjustments to prevent dished crimps.

Only show this user. #2 ·Jan 26, 2017. Hodgdon shows 8000 PSI at 1250 FPS with 17.4 Gn. of Clays and 9000 PSI at 1300 FPS with 18.4 Gn. of Clays with the TGT12 wad. Both loads with W209 primers. This was taken directly from the Hodgdon Basic Reloading Manual published January 2009. Clay dot can be substituted for Hodgdon Clays grain for grain.

The CB0178-12 wad was designed for use in 7/8 oz to 1 oz trap, skeet, or sporting clays loads. Technical Information: •Replaces the Winchester WAA12L. •Optimal Load: 7/8 oz. •Intended as an economical wad replacement for target and wing shooters. •Wads are made with 100% prime resin for consistency.

Claybuster CB6118-12 12ga FED/FIO (bag/500) Claybuster CB6118-12 Straight Wall wads (500/bag) Located in Kentucky, Claybuster is a great American manufacturing partner. They utilize quality virgin materials in their wads and they are made here in the USA. Quality, value, and service that dusts the competition! Optimum load is 1-1/8 oz.The load uses any one of the above cases, primers can be W-209's, Rem. 209P's, Fiocchi 616's Nobel Sports or CCI-209's. 17.3 grs Clays, (or Clay Dot), Claybuster CB0178-12 (gray) wad, 7/8 oz. shot. For other loads using other powders, pick a 1 oz. load, using the above cases and a WAA12SL wad.REX-24 (24 grams or 7/8 ounce) 12ga wad (250/bag) Designed for stinging 7/8 oz. loads (like the Curmudgeon's famous "Killer Bee" loads) in straight-walled hulls such as Cheddite, Fiocchi, Rio, Federal Gold Medal, or Remington SP-types. The elaborate gas seal column progressively absorbs energy during acceleration to peak velocity.CB4100-12 Reloading Data ~ 1 Ounce Shot Loads. J-Ron Inc.'s Claybuster Wad Line is a well established economical wad line built for target-shooters and wing-shooters alike. With twenty-one different models from which to choose, the Claybuster Wad Line can satisfy nearly every target or wing shooting application for reloading.They are the best wads I have ever used in my 50 years of reloading." Testimonials - CB4100-12 ... I've also been very happy with the CB0178 wads too. Remington STS hull or GC Rem STS209 primer 17.5 grains Titewad 7/8 ounce of shot CB4100 wad Very close to 1250fps according to Hodgdon site ... I have been using your CB4100-12 (Lighting) 12 ga ...The breaks looked a lot better than the cb0178-12 and my barrels looked a lot better too (less wad fouling). ... Here is a link to Claybusters load data for their 3/4 oz 12 ga wad. I shoot 80% of my skeet practice with the 3/4 oz …Using AAHS hulls, Winchester 209 primers, 17.5 grains Clays behind a CB0178-12 wad and +-380 grains no. 8 hard shot, I'm getting around 1200 fps. This morning, I chronographed some of the same loads with 18 grains Clays, and got between 1330 and 1350 fps. I hope this helps. I wasn't looking for a bunker load, but I sure found one. CB0178-12 (WAA12L). For use in 7/8 to 1 oz. trap, skeet or sporting clay loads. Performs best in tapered hulls, Remington or Winchester. Specifications and Features: REPLACES WINCHESTER WAA12L. Check your reloading manual or go to a powder manufactures website for load data. WARNING: This product contains chemicals known to the State of ... You can look through their reloading information online, they have quite a few recipes. Think all use the CB0178 (WAA12L) wad. Less powder required than even Red Dot, nice high pressures, everyone seems to be happy with cleanliness. ... look at the Winchester and Remington hull specific data and 3/4 and 7/8 Oz loads are listed. 12-Gauge, 2 3/4 ...

The only listed data from Alliant is for extra-lite powder. I have loaded 7/8 loads of E3 and clays with 3/4 shot with good luck. ... ANY REMINGTON HULL - CB0178-12, Downrange XXL Pink, Gray AA12L; FEDERAL, IMPORT HULL - CB2100-12, Downrange XXL Orange, Fed. 12S0. Those wads satisfy dimensions required for good crimps with the least dishing ...NOTICE: This load data is for informational purposes only!!! This is MY load data, and MY load data alone. ... 2/3/2017 11:24 25 - CSB5, 18.6 gr CB0178-12 wad w/cork and card Distance Coeff Weight Temp BP Altitude 5 1 395 74 °F 30.22 inHG 20 # FPS FT-LBS PF 5 1120 1100.4 442.4 4 1157 1174.3 457.02 3 1197 1256.9 472.82 ...CB0178-12 wad 7/8 ounce of shot primer of choice 3cc or 35 grains by weight of 3F APP or Shooters World Black. ... ALL BP shot loads ought to be patterned before trusting them on the SASS range. An old cardboard box at 8 paces will work fine for this. And you can shoot at least 4 patterns per box if you rotate to a new side.Here are two of the loads I use on sporting clays: Remington STS hull 7/8 ounce #8 magnum hard shot 18.4 to 18.6 grs. Titewad Claybuster CB0178-12 wad (clone of the WAA12L wad) Rem. STS or Win. 209 primer Hodgdon documents this load as producing 1300 fps @ 9,400 psi. Remington STS hull 1 ounce #7-1/2 magnum hard shot 19.2 to 19.5 grs. ClaysInstagram:https://instagram. replacement crossbow limbsis naf naf healthyfontana ca sales tax rategas prices in twin falls id 7/8 1,200fps Rem 209P e3 WAA12L 16gr 7,265 psi. Alliant 3/4oz loads list only Extra Lite And CB lists no e3 loads for their CB0175-12 wads. I would prefer to use my abundant CB0175-12's rather trying to get proper stack with CB0178-12 wads while simply lowering the shot drop. The pressures above seem pretty low and would suggest that an e3 load ...Why not try the CB 1075-12 wad. Made for 3/4 loads. ... Then you should also try the grey Claybuster CB0178-12 that they are based on. To date, of all of the wads that I've tried, the CB0178 has been the best fitting and best performing wad for 3/4 oz in the Gun clubs. It's also the tallest of the 7/8th's oz wads available and the cheaper then ... joshua day memphis4dpo symptoms if pregnant However, some like the grey Claybuster CB0178-12 (WAA12L clone), and a lot of that depends on the resulting stack height of your particular powder (and amount). ... I'm not much into 7/8 oz loads but when I do I use DR XXL wads. The duster, green fig-8, grey AA style and the CB Lightning 4100 Windjammer style wads all work well with the right ... st joseph animal control and rescue photos The CB0178-12 wad was designed for use in 7/8 oz to 1 oz trap, skeet, or sporting clays loads. Technical Information: •Replaces the Winchester WAA12L •Optimal Load: 7/8 oz •Intended as an economical wad replacement for target and wing shooters •Wads are made with 100% prime resin for consistency These are the best wads to use for ...Claybuster CB1075-20 20ga 3/4oz wad (bag/500) CB1075-20 (3/4 oz. Wad) For use in 3/4 oz. skeet, sporting clays or hunting loads. Versatile for most hulls depending on powder volume. www.ballisticproducts.com. templetk333.